Low Twist X3
The Low Twist X3 unit is essentially an unrolling device, utilising an optical sensor system to ensure that the rotation of the package is synchronised with the weft insertion speed of the loom. This application is specifically designed to improve the weaving of metallized polyester film e.g. Lurex, since it can reduce the twist from ribbon yarn when being drawn from the package. The Low Twist X3 unit must be installed behind a weft accumulator. The new model Low Twist X3 unit connects to the same Voltage supply box of the X2 / X3 generation of weft accumulators.
Technical data
| Max unrolling speed: | 600 m/min |
| Max bobbin weight: | 500 grams |
| Suitable bobbin external diameter: | 55, 70, 79 or 82 mm |
| Suitable bobbin inner diameter: | 9 mm |
| Suitable bobbin external length: | 65, 87 or 96 mm |
| Connection to X2/X3 voltage supply box: | Maximum two Low Twist X3 units in addition to existing weft accumulators for each box. |
| Dimensions: | – |
| Weight: | – |
Technical data
| Max unrolling speed: | Max bobbin weight: | Suitable bobbin external diameter: | Suitable bobbin inner diameter: | Suitable bobbin external length: | Connection to X2/X3 voltage supply box: |
|---|---|---|---|---|---|
| 600 m/min | 500 grams | 55, 70, 79 or 82 mm | 9 mm | 65, 87 or 96 mm | Maximum two Low Twist X3 units in addition to existing weft accumulators for each box. |
Questions?
Submit your data and you will be contacted by one of our experts
